Page 1 of 1
GPIO_Start_Vellemanserver
Posted: 02 Oct 2016 17:11
by atlantic
I have a problem with gpio_start_vellemanserver. If I turn on AutoPlay stops gpio velleman, but when I turn it back off, it does not return to the gpio start velleman. I have made a movie.
https://dl.dropboxusercontent.com/u/170 ... TOplay.mp4
Re: GPIO_Start_Vellemanserver
Posted: 02 Oct 2016 21:18
by radio42
Can you please enable the 'Debug Logging' option in the GPIO-Client application and then (after you tried it again) send me the Debug_ .log file of the ProppFrexx GPIOClient (its contained in the AppUserData folder of the ProppFrexx GPIOClient).
Re: GPIO_Start_Vellemanserver
Posted: 03 Oct 2016 16:30
by atlantic
Re: GPIO_Start_Vellemanserver
Posted: 03 Oct 2016 20:01
by radio42
Yes, there seems to be an issue in your case with starting the Velleman interface again.
I can not say why (as here for example it works fine) - but the log "DispatchCommand Reply: ERROR: unknown - command cannot be executed" indicates, that the start can not be executed.
Unfortunately I currently cannot say why in your case.
So I need to provide you with a newer version which logs a few more details to 'see' what exactly is failing in your case...
I'll let you know when a newer version is available to test with ...
Re: GPIO_Start_Vellemanserver
Posted: 04 Oct 2016 18:52
by atlantic
yes yes everything works as it should be. Thank you
Re: GPIO_Start_Vellemanserver
Posted: 04 Oct 2016 19:29
by radio42
After some more investigation, I guess I have found the issue.
A new v4.0.1.66-beta (see "Check for Beta-Versions...", located under the blue question mark icon at the very top right) is available to test.