ProppFrexx ONAIR User-Forum

Hello!
I would like to know how to perform voicetracking through a router.
I followed all the indications in the video tutorial but I get an error message to connect.

Thanks in advance!

Then some of your network elements is probably blocking the traffic.
The used port number must be opened in your firewall.
Many users do use a router to perform RVT.

Do your server has a static IP?
If it is a local network router you may be need to configure Port-Forwarding on it to reach you local network PC.

Then some of your network elements is probably blocking the traffic.
The used port number must be opened in your firewall.
Many users do use a router to perform RVT.

Do your server has a static IP?
If it is a local network router you may be need to configure Port-Forwarding on it to reach you local network PC.

I opened the port on the firewall. The IP is dynamic, so update it before connecting.
But I still can not establish the connection.

I receive the following message:
"Connection Error. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond..."

Then the client cannot connect to your server.

Is your server sitting on a local network behind a DSL Router?
If yes see my above comment about the Port-Forwarding.
Have you defined that accordingly on your Router?

note: your DSL Router establishes a connection to your ISP which provides the dynamic IP address for the outer world. But also manages your local network with your local IP addresses.
So with Port-Forwarding you need to tell your Router to link certain TCP traffic from the outer world IP to your inner network IP address.

I did everything you told me and it worked!
Thanks Bernd