ProppFrexx ONAIR User-Forum

It must be something simple. Every hour PF paused, what can be wrong?

For sure there is. But without any more detailed explanation when exactly it stops there could be many reasons. So I cannot guess kn the dark.

If it stops with each Program Scheduler change, check your program entries Start Type. If it is eg. Manual or Automatic, change this to Fixed or Soft.

That was the problem, Thxs Bernd

Hi Bernd, i have to admit. This wasn't the problem. It looked like we'd entered the problem, but not.
All (no exeption) scripts are all on FIXED. But PF still sometimes loads the new script, but doens't play. It shows a blinking AUTO PLAY button.
Another phenonomen is showing in the playlists off the remote voice trackers, see the pic. I guess thats something we activated in the General setting, how to default it again?
Will

PS this is a piece from the last log:

1-11-2017 11:58:52: Program:Admin_Playlist RVT Template [12.00 tot 13.00] (Admin_Playlist RVT Template [12.00 tot 13.00]), Start:1-11-2017 12:00:00, End:1-11-2017 13:00:00, Started:True
1-11-2017 12:58:47: Program:LOES IN THE MIX (12.00 tot 13.00), Start:1-11-2017 13:00:00, End:1-11-2017 14:00:00, Started:True
1-11-2017 13:55:02: Program:Admin_Playlist RVT Template [14.00 tot 15.00] (Admin_Playlist RVT Template [14.00 tot 15.00]), Start:1-11-2017 14:00:00, End:1-11-2017 15:00:00, Started:True
1-11-2017 14:28:58: Scheduler stopped
1-11-2017 14:29:00: ProgramScheduler: Scheduler started


2-11-2017 15:54:54: Program:Admin_Playlist RVT Template [16.00 tot 17.00] (Admin_Playlist RVT Template [16.00 tot 17.00]), Start:2-11-2017 16:00:00, End:2-11-2017 17:00:00, Started:True
2-11-2017 15:56:36: Scheduler stopped
2-11-2017 15:56:46: ProgramScheduler: Scheduler started
2-11-2017 16:54:54: Program:Admin_Playlist RVT Template [17.00 tot 18.00] (Admin_Playlist RVT Template [17.00 tot 18.00]), Start:2-11-2017 17:00:00, End:2-11-2017 18:00:00, Started:True
2-11-2017 17:58:48: Program:SMAKELIJK LUISTEREN (18.00 tot 19.00), Start:2-11-2017 18:00:00, End:2-11-2017 19:00:00, Started:True

AND NOW THE MOST UNEXPECTED SITUATION.

3-11-2017 22:58:48: Program:AVONDJE LOES UUR 4 (AVOND 18.00 TOT 21.00), Start:3-11-2017 23:00:00, End:4-11-2017 00:00:00, Started:True
3-11-2017 23:58:47: Program:Nachsjiech uur 1 (NAMIDDAG 14.00 TOT 18.00), Start:4-11-2017 00:00:00, End:4-11-2017 01:00:00, Started:True
4-11-2017 00:58:47: Program:Nachsjiech uur 2 (NACHT VAN 0.00 TOT 07.00), Start:4-11-2017 01:00:00, End:4-11-2017 02:00:00, Started:True

THE PLAY OUT STOPPED AGAIN BETWEEN 0.00 AND 01.00. We had to push the auto-play again.

Strangly there is no errorlog, just what i shows above.

Oké, will be continued

I must say, that I don’t understand what you are saying. I also do not understand what the screenshot should show me?!
Please explain in more detail what the issue is about your remote voice tracking?!

Please also indicate what exact version you are using.

The marked log entries also doesn’t seem to match your screenshot. So all a bit puzzling to me.

Please activate the ‚Debug Logging‘ in the general settings section ‚More Stuff‘. And then the Mews are not starting again, please send me a FULL screenshot and the related Debug .log file which will be generated in your defined global log path. Plus the exact time when the News should theoretical be started. Once done please deactivate the Debug Logging again.

I recall, that you had a total disk crash with lots of corrupted files and a total dial full issue.
So may be there are many more config files corrupt?

Anyhow, please proceed with all what I explained and requested above and we will see.

Bernd, it happens again -).
The scheduler was running without any problems till last wednseyday. We've updated the systems and the latest updates are running. But the autoplay sometimes stops after the overlay scheduler is ready. What can i do to fix the problem?
24-6-2018 05:58:46: Program:NACHSJIECH UUR 7 NONSTOP (MIXTEST 3 scripts ), Start:24-6-2018 06:00:00, End:24-6-2018 07:00:00, Started:True
24-6-2018 06:58:47: Program:NACHSJIECH UUR 7 NONSTOP (MIXTEST 3 scripts ), Start:24-6-2018 07:00:00, End:24-6-2018 08:00:00, Started:True
24-6-2018 07:37:26: Scheduler stopped
24-6-2018 07:49:56: ProgramScheduler: Scheduler started
24-6-2018 07:49:59: Program:NACHSJIECH UUR 7 NONSTOP (MIXTEST 3 scripts ), Start:24-6-2018 07:00:00, End:24-6-2018 08:00:00, Started:True
24-6-2018 07:58:47: Program:NACHSJIECH UUR 7 NONSTOP (MIXTEST 3 scripts ), Start:24-6-2018 08:00:00, End:24-6-2018 09:00:00, Started:True
24-6-2018 08:58:48: Program: (09.00 tot 10.00), Start:24-6-2018 09:00:00, End:24-6-2018 10:00:00, Started:True
24-6-2018 09:23:48: Scheduler stopped
24-6-2018 09:25:36: Calendar 'H:\ProppFrexx\ProppFrexx ONAIR.calendar' read-in (last modified: 24-6-2018 09:23:48)
24-6-2018 09:25:40: ProgramScheduler: Scheduler started
24-6-2018 09:25:45: Program: (09.00 tot 10.00), Start:24-6-2018 09:00:00, End:24-6-2018 10:00:00, Started:True
24-6-2018 09:26:53: Scheduler stopped
24-6-2018 09:28:13: Calendar 'H:\ProppFrexx\ProppFrexx ONAIR.calendar' read-in (last modified: 24-6-2018 09:26:54)
24-6-2018 09:28:16: ProgramScheduler: Scheduler started
24-6-2018 09:28:21: Program:N (09.00 tot 10.00), Start:24-6-2018 09:00:00, End:24-6-2018 10:00:00, Started:True
24-6-2018 09:33:11: Scheduler stopped
24-6-2018 09:38:58: Calendar 'H:\ProppFrexx\ProppFrexx ONAIR.calendar' read-in (last modified: 24-6-2018 09:33:11)
24-6-2018 09:39:17: ProgramScheduler: Scheduler started
With hand

IS there perhaps a second command which i can program in the scheduler so when PF doens't start automaticly, a command will take over?

I hope you understand my question,
Sincerly
Will

The log entries clear show, that someone stopped the Scheduler.
Why this is is hard to say, but there are only 3 possibilities when a Scheduler is stopped:
a) you manually stop it
b) you send a control-command PROGRAM_SCHEDULER_OFF
c) you close ProppFRexx ONAIR
So please check, if you maybe issue a command with your overlay scheduler or anywhere else in your system.

radio42 wrote: 24 Jun 2018 11:24 The log entries clear show, that someone stopped the Scheduler.
Why this is is hard to say, but there are only 3 possibilities when a Scheduler is stopped:
a) you manually stop it
b) you send a control-command PROGRAM_SCHEDULER_OFF
c) you close ProppFRexx ONAIR
So please check, if you maybe issue a command with your overlay scheduler or anywhere else in your system.

Sorry Bernd, none of those actions are actual. The scheduler is also doing strange things.