Two midi controllers led feedback

[Andre Kroon]

Hello, i have a question is it possible in Proppfrexx to have led feedback on two midi controllers in the Events/ Commands section?
I use two midi controllers but led feedback is only avallible on the first controller.

[radio42]

The two MIDI devices in ProppFrexx work totally independent (and use the same logic and code, but just use different ports).
So I don't see any reason, why it should only work on the first one - except there is a limitation on the device side.

What 'led feedback' are you talking about?

[Andre Kroon]

The leds from the buttons of the controllers akai apc mini mk2 and livid ohm rgb.

When i select in midi divices section input 1 and output 1 the akai and input 2 and output 2 the livid controller only the leds of the akai works.
As i put the livid on in and output 1 and the akai in in and output 2 only the livid controller have led feedback.
All the led commands are in the event/commands section do i need programm one controller to another channel ?

[Andre Kroon]

The midi commands in both cotrollers works fine, only the leds in controller selected in and output1 works as i said.

[radio42]

Can you send the control-command you are using (which is not working) and which events you are using to drive the leds?
Please send a screen-shot or text of the event/commands section.

[Andre Kroon]

The Livid controller is working but no led pads light up.

Pad is 65
Colour is 31 ( Red )

[radio42]

Note, that you must you use EXEC_SEND_MIDI2_SHORTMSG for the 2nd MIDI device.

In your events I only see commands for the 1st MIDI device.
I.e. EXEC_SEND_MIDI_SHORTMSG vs EXEC_SEND_MIDI2_SHORTMSG

[Andre Kroon]

Oke,thank you it works, i did'nt see that sorry.

[radio42]

Glad it is working.